E-Cells Super Monarch Crown AWD 1500

Color
Camo - PRE-ORDER - Available Early July 2021
Matte Black w/ Black Rims - PRE-ORDER - Available Early July 2021
Shiny Black w/ Gold Rims - PRE-ORDER - Available Early July 2021
Blue - PRE-ORDER - Available Early July 2021
Orange - PRE-ORDER - Available Early July 2021
Red - PRE-ORDER - Available Early July 2021
Front Basket?
Add Extended Warranty
  • Motors:    2 Powerful Bafang 750 Watt Hub Motors
  • Batteries:  52V / 17.5Ah AND 52V / 14Ah 
  • Tires:         26 x 4.25 Fat Vee Bulldozer Tires
  • Gears:       10 Speed Derailleur
  • Throttle:    Right Hand Twist Throttle
  • PAS:           9 Levels of Pedal Assist
  • Suspension:  FULL Suspension
  • Charger:    5 Amp Charger
  • Weight:     95lbs  

E-Cells Super Monarch Crown AWD 1500

The E-Cells Super Monarch Crown AWD 1500 packs out a total of 400lbs not including the bike! Runs up to 2200-watts of peak power with our twin motor, twin battery, and twin suspension design. No other manufacturer in the world offers all these features. We went to Bafang and had built special front and rear 52v750w motors. They have never built one of these motors except now for E-Cells. Another first for E-Cells! This bike has an 18 MOSFET controller that blasts out over 44 amps of power! That’s a total peak power of 2200 watts certified!

 

E-Cells Super Monarch Crown AWD 1500 

 

ELECTRIC SYSTEM

  • MOTOR: Twin 750watt52v Bafang geared hub motors have been specially built for E-cells and have a combined 170 nm of torque giving you twice the torque than a standard 48v750 watt hub motor. With dual motors (AWD) you will climb like a Billy Goat and go places other bikes can’t go. Would you go up into the mountains with snow in a truck with two-wheel drive or with a four-wheel drive? Then why would you buy a one-wheel drive system on an E-bike? E-Cells is the only twin motor, twin battery, full suspension bike on the market! (IP 65 Waterproof rated)
  • CONTROLLER: 52V Sine Wave 45-amp controller with 18 MOSFETS sealed in conductive gel to help dissipate heat away from the heat sensitive components and provide waterproofing. (IP 65 Waterproof rated) Also included is two 1.25×3.5” aluminum cooling fins to aid in heat dissipation.
  • PEDAL ASSIST SENSOR: 1:1 with 9 levels of assist with a cadence sensor. Now you can transition from very little effort in pedaling and gradually decrease the assistance as your legs get stronger. (IP 65 Waterproof rated)
  • DISPLAY DASHBOARD: 750-C DISPLAY with BLUETOOTH and pin code lockout as a security feature. Bluetooth & Mobile navigation (currently for I-Phone only), Smart battery indicator, providing a reliable battery indicator; Mileage indicator: Odometer/Trip distance/Clock/Riding time. Know how much power your using with its Power indicator: real-time power indicator, digital or analog. 6km walking feature to walk beside bike or to power the bike upstairs with our two-drive system as you walk beside. Speed display: RT SPEED MAX SPEED AVG SPEED.KM/ Mile and mileage with: ODO, Trip, Time, Range (IP 65 Waterproof rated)
  • THROTTLE: Half-twist throttle on right hand side with leather grip. (IP 65 Waterproof rated)
  • BATTERIES:  A total of 1638 Watt Hours of power a 9% increase over the 700 and 1000w Super Monarchs- 52Volt 17.5AH Front Battery with USB phone charge port and charge indicator, + a 52Volt14AH Rear rack battery using SAMSUNG 35E 18650 3500mh matched batteries with an on/off toggle switch and built rear taillight. These specially designed batteries are designed to fire out 45 amp of power each so you can run one battery at a time and still provide 2200 watts of power to the front and rear motors or use both batteries simultaneously. This allows the batteries to run much cooler increasing the efficiency and thus the overall run time for more mileage.
  • NEW INTEGRATED CHARGE PORT ON FRAME. AN E-CELLS EXCLUSIVE FEATURE! (Patent Pending) Now instead of using two chargers to charge the two batteries we have developed a charge port on the frame.
  • BATTERY CHARGING TIME 7 hours if batteries are fully exhausted.
  • BATTERY CHARGERS: One 5 amp charger/fan charging 2 batteries at once.
  • LIGHTS: Front LED 80 LUX headlight and Rear Light equipped in rear or rack battery.
  • CABLES AND CONNECTIONS: All waterproof connectors. Each motor can be disconnected for on road use to comply with local laws restricting the amount of power in use.

   FRAMEWORK

  • FRAME: #6061 Aircraft Aluminum Alloy
  • FRONT FORK: RST  Air Suspension Shock with 96 mm of travel includes a lockout feature and adjustability for weight of rider. Extra strong dropouts to handle the increased power for this bike.
  • REAR SUSPENSION: The RockShox Monarch RL Rear Shock. The Monarch’s lightweight design not only delivers silky smooth travel, but thanks to a redesigned Solo Air spring with updated damping controls, it also delivers a spring rate you’d generally only get from a much heavier coil shock. So, you get a durable, fully adjustable shock capable of smoothing out the most aggressive trails, while simultaneously saving you weight for epic cross-country riding. The Monarch RL features external rebound and 2-Position compression adjustment (Open/Pedal).
  • STEM: PROMAX Aluminum Alloy Adjustable
  • HEADSET: NECO Aluminum Alloy
  • SEAT POST: PROMAX Aluminum Alloy Seat Post 31.8mm
  • SADDLE: Fat Seat has been upgraded for your riding comfort.
  • GRIPS: Comfortable ergonomic leather grips allowing you to rest the heel of your hand firmly on the handlebars for added safety and support. They also lessen numbness.
  • DRINK CUP BOSSES. Pre-drilled holes on the top frame with hex bolts allows for easy drink cup installation
  • SEAT POST: height is 19″ with stand over height of 30.5″”

 

WHEEL SET

  • RIM: Double Wall aluminum painted to match frame or anodized with some models. This prevents a spoke from puncturing the inner tube in the event of a high impact event and also helps to strengthen the wheel.
  • SPOKE: Strong 12 gauge steel with stainless steel Beds
  • TIRES: The Super Monarch Crown now comes with Vee Bulldozer is a 26×4.25”MPC 72tpi. This tire is actually 5.25 inches wide ! This aggressive tire is designed to pound the trail into submission regardless of how soft, loose or wet the terrain is. At the heart of Bulldozer is an aggressive tread pattern this is a very popular mountain bike design that’s been ballooned to cover more ground in a very aggressive fashion. The tread pattern has alternating twin paddle blades on each side of the center line, inter spaced with chamfered edging center blocks to dig and drive deeply, delivering you to your destination quickly no matter how bad (or good) traction is.
  • FRONT BRAKE; TEKTRO DORADO HD-E730 HYDRAULIC DISK BRAKES WITH FOUR PISTONS E-Bike – Hydraulic Disc Brake With Sensor Control Design upgraded with a 203MM w/2.3MM THICK Disk Rotor
  • REAR BRAKE: TEKTRO DORADO HD-E730 HYDRAULIC DISK BRAKES WITH FOUR PISTONS E-Bike – Hydraulic Disc Brake With Sensor Control Design upgraded with a 203MM w/2.3MM THICK Disk Rotor
  • BRAKE LEVERS: Tektro Forge aluminum lever / Cast aluminum bracket 4 finger blade with ball end

 

TRANSMISSION 

  • CHAIN WHEEL: PROWHEEL 46T
  • CRANK ARM: PROWHEEL 170MM LENGTH
  • SHIFTER: SHIMANO DEORE
  • CASSETTE SPROCKET: 10-SPEED  SHIMANO DEORE CS-H650-10  HYPERGLIDE. Delivers precise and consistent shifting across a wide range of Mountain bike conditions – 11-36T MTB Cassette Sprocket (11-13-15-17-19-21-24-28-32-36Tooth)
  • DERAILLEUR: Shimano 10 speed Deore RD-M6000 rear derailleur is optimized for Shimano’s “Dyna-Sys” technology. Chain bouncing can often cause noise as the chain slaps the top and bottom of the chain stay, or even derail from the front chain ring in extreme circumstances. The switch when set to the ON-position dampens the cage and therefore a consequent chain movement for a nearly silent and stable riding experience. In the OFF-position it eases the installation and removal of the rear wheel by relaxing the spring tension of the cage. The low-profile design is intended for more aggressive riding and saves the rear derailleur from damage in narrow passages. Direct routing reduces the risk of snagging.
  • CHAIN: KMC X10E with stretch proof treatment, high torsion resistance, and TRIPLE X DURABILITY
  • Total weight with batteries 95 lbs. 
  • FRAME SIZE IS A LARGE 19″

Each bike will receive the following accessories:

OVER $250 IN ACCESSORIES!!

  • HELMET ($25 Value)
  • MIRRORS ($25 Value)
  • CARGO NET AND CARGO STRAP ($15.Value)
  • RACK MOUNTED TOOL KIT W/ AIR PUMP AND ALL NEEDED TOOLS FOR ASSEMBLY ($30 Value)
  • TWO CUSTOM PANNIERS ($80 Value)
  • PORTABLE ELECTRIC MINI AIR PUMP ( $70. Value)
  • TWO  ALUMINUM HEAT SINKS TO BE PLACED ON THE EXTERIOR OF THE CONTOROLLER ($15. Value)

Order Confirmation:
As soon as you place your order, you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorized your credit card for the purchase.  As soon as we receive your order, we automatically reach out to our suppliers to confirm that it is in stock and available for immediate shipment.  If your item is on backorder or unavailable, we will void the pre-authorization and reach out to you via e-mail.  If your item(s) are available, we will process the charges and submit the order for shipment.

Order Shipment:
If your order is in stock and we process the charges to your credit card, it will ship within five business days from the date of your order.  We will send you tracking information within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out.  If you do not receive tracking information from us within six business days of your order, feel free to follow up with us at support@ebikegeneration.com

Shipping Times:
Shipping to the lower 48 usually takes between 3 to 5 business days but you should allow 3 to 10 business days depending on carrier used and delivery location.

Damages:
Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it when signing for delivery.  If your item(s) do arrived damaged, please send photos to support@ebikegeneration.com and we will process an insurance claim on your behalf.

eBike Generation has teamed up with different financial institutions to offer you a variety of financing options.  If you choose to finance your purchase you can do so during the checkout process.

When checking out on the website you will see the below options.  First is the Credit Card option, but immediately below are the 3 financing options.  PayPal – Klarna – QuadPay.

Regardless of which financing option you choose, we ship you the eBike immediately. 

Each financing option is different and I’ll explain the key points of each one for you on this page so you can make a decision based on which financing option is the best for you.

Learn more about our financing options

Back to the top